1. 제품명 : 픽스호크 6C(PIXHAWK 6C)+PM02+NEO-M8N GPS (알루미늄 케이스 버젼) [홀리브로/Holybro]
2. 간략설명 : 픽스호크 6C+PM02+NEO-M8N GPS 알루미늄 케이스 버젼 입니다.
   600급 이상의 기체에 적합하게 설계된 최신 컨트롤보드 픽스호크 6C이며,
   PM02 파워모듈+M8N GPS가 기본포함된 세트 제품 입니다.
   APM/나자등 고급FC보다 월등히 좋은 성능과 주변장비들의 확장성으로 무장하여
   취미용뿐만 아니라 연구용으로도 활용도가 폭넓은 FC입니다.
   기존 방식과 동일하게 미션 플래너를 이용해서 세팅하시면 됩니다.

   자세한 내용은 아래의 카달록을 참고하시기 바랍니다.

[Holybro] Pixhawk 6C Aluminum Case + PM07 + NEO-M8N GPS 픽스호크 6C

Features
The Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6C, you can find an STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.
The Pixhawk® 6C's H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.
The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.

Key Design Points
High performance H7 Processor with clock speed up to 480 MHz
New cost-effective design with low-profile form factor
Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs

Spec
*Processors & Sensors
FMU Processor: STM32H743
32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM
IO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM

*On-board sensors
Accel/Gyro: ICM-42688-P
Accel/Gyro: BMI055
Mag: IST8310
Barometer: MS5611

*Electrical data
Voltage Ratings:
Max input voltage: 6V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
Telem1 Max output current limiter: 1.5A
All other port combined output current limiter: 1.5A

*Mechanical data
Dimensions: 84.8 * 44 * 12.4 mm
Weight: 59.3g

*Interfaces
16- PWM servo outputs (8 from IO, 8 from FMU)
3 general purpose serial ports
Telem1 - Full flow control, separate 1.5A current limit
Telem2 - Full flow control
Telem3
2 GPS ports
GPS1 - Full GPS port (GPS plus safety switch)
GPS2 - Basic GPS port
1 I2C port
Supports dedicated I2C calibration EEPROM located on sensor module
2 CAN Buses
CAN Bus has individual silent controls or ESC RX-MUX control
2 Debug port
FMU Debug
I/O Debug
Dedicated R/C input for Spektrum / DSM and S.BUS, CPPM, analog / PWM RSSI
Dedicated S.BUS output
2 Power input ports (Analog)

Item Packing
Pixhawk 6C Flight Controller x1
UBLOX M8N GPS Module x1
PMO7 Power Module x1